Optical Properties Research Articles

Room-Temperature Phase Transition Material with Switchable Second-Order Nonlinear Optical Properties.

Phase transition materials with switchable second-order nonlinear optical (NLO) properties have attracted extensive attention because of their great application potential in photoelectric switches, sensors, and modulators, while metal-free organics with NLO switchability near room temperature remain scarce. Herein, we report a hydrogen-bonded metal-free organic crystal, 2-methylpropan-2-aminium 2,2-dimethylpropanoate (1), exhibiting a room-temperature phase transition and favorable NLO switchability. Through investigations on its thermal anomalies, dielectric properties, and crystal structures, we uncover that 1 holds a near-room-temperature phase transition at 303 K from noncentrosymmetric point group C2v to centrosymmetric one D2h, which is attributed to the order-disorder transformations of both tert-butylamine cations and dimethylpropionic acid anions. Accompanied by symmetry change during the phase transition, 1 exhibits reversible and repeatable NLO "on-off" switchability with a desirable switching contrast ratio of ca. 19 between high and low NLO states. This discovery demonstrates a metal-free organic crystal with NLO switching behavior near room temperature, serving as a promising candidate in smart and ecofriendly photoelectric functional materials and devices.

Antibacterial efficacy ofRumex dentatusleaf extract-enriched zinc oxide and iron doped zinc nanoparticles: a comparative study.

In the current investigation, zinc oxide (ZnO) nanoparticles and Fe-doped ZnO nanoparticles were sustainably synthesized utilizing an extract derived from theRumex dentatusplant through a green synthesis approach. The Scanning electron microscope (SEM), X-ray diffraction (XRD), Energy-dispersive x-ray spectroscopy (EDX), Ultra-violet visible spectroscopy (UV-vis) spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA) techniques were used to examine the compositional, morphological, optical, and thermal properties of both samples. The doping of iron into ZnO NPs has significantly influenced their properties. The analysis firmly established that both ZnO NPs and Fe-doped ZnO NPs have hexagonal wurtzite structures and spherical shapes by XRD and SEM. The EDX analysis suggests that iron atoms have been successfully integrated into the ZnO lattice. The change in color observed during the reaction indicated the formation of nanoparticles. The UV-vis peaks at 364 nm and 314 nm confirmed the presence of ZnO NPs and Fe-doped ZnO NPs, respectively. The band gap of ZnO NPs by Fe dopant displayed a narrowing effect. This indicates that adding iron ions to ZnO NPs offers a control band gap. The thermal study TGA revealed that Fe-doped ZnO NPs remain stable when heated up to 600 °C. The antibacterial efficacy of ZnO NPs and Fe-doped ZnO NPs was evaluated against several bacterial strains. The evaluation is based on the zone of inhibition (ZOI). Both samples exhibited excellent antibacterial properties as compared to conventional pharmaceutical agents. These results suggest that synthesizing nanoparticles through plant-based methods is a promising approach to creating versatile and environmentally friendly biomedical products.

Tailoring the Holocellulose Fiber/Acrylic Resin Composite Interface with Hydrophobic Carboxymethyl Cellulose to Enhance Optical and Mechanical Properties.

Interface engineering is essential for cellulosic fiber-reinforced polymer composites to achieve high strength and toughness. In this study, carboxymethyl cellulose (CMC) functionalized with hydrophobic quaternary ammonium ions (QAs) were utilized to modify the interface between holocellulose fibers (HF) and acrylic resin. The wet HF/CMC papers were prepared by vacuum filtration, akin to papermaking, followed by cationic ion exchange with different hydrophobic QAs. Subsequently, the modified papers were dried, impregnated with an acrylic resin monomer, and cured to produce transparent composite films. The effect of the hydrophobic QA moieties on the structure and optical and mechanical properties of the HF/CMC/acrylic resin composites were investigated. The composite film with cetyltrimethylammonium (CTA)-functionalized CMC showed high optical transmittance (87%) with low haze (43%), while the composite film with phenyltrimethylammonium (PTMA)-functionalized CMC demonstrated high Young's modulus of 7.6 GPa and high tensile strength of 180 MPa. These properties are higher than those of the composites prepared through covalent interfacial modification strategies. The results highlighted the crucial role of hydrophobic functionalized CMCs in facilitating homogeneous resin impregnation in the HF fiber network, producing a composite with enhanced interfacial adhesion strength, increased optical transparency, and mechanical strength. This facile use of hydrophobic CMCs as interfacial compatibilizers provides an energy-efficient route for preparing transparent, thin, and flexible composite films favorable in optoelectronic applications.

Exploring the potential of eco-friendly carbon dots in monitoring and remediation of environmental pollutants.

Photoluminescent carbon dots (CDs) have garnered significant interest owing to their distinctive optical and electronic properties. In contrast to semiconductor quantum dots, which incorporated toxic elements in their composition, CDs have emerged as a promising alternative, rendering them suitable for both environmental and biological applications. CDs exhibit astonishing features, including photoluminescence, charge transfer, quantum confinement effect, and biocompatibility. Recently, CDs derived from green sources have drawn a lot of attention due to their strong photostability, reduced toxicity, better biocompatibility, enhanced fluorescence, and simplicity. These attributes have shown great promise in the areas of LED technology, bioimaging, photocatalysis, drug delivery, biosensing, and antibacterial activity. In contrast, this review offers a comprehensive overview of various green sources utilized to produce CDs and methodologies, along with their merits and demerits, with a notable emphasis on physiochemical properties. Additionally, the paper provides insight into the bibliometric analysis and recent advancements of CDs in sensing, photocatalysis, and antibacterial activity. In this field, extensive research is underway, and a total of 7,438 articles have been identified. Among these, 4242 articles are dedicated to sensing applications, while 1518 and 1678 focus on adsorption and degradation. Carbon dots demonstrate exceptional sensing capabilities within the nanomolar range with a selectivity of up to 95% for pollutants. They exhibit excellent degradation efficiency exceeding 90% within 10-130 min and possess an adsorption capacity from 100 to 800 mg/g. These fascinating qualities render them suitable for diverse applications.

Development of Stable Water-Soluble Supratomic Silver Clusters Utilizing A Polyoxoniobate-Protected Strategy: Giant Core-Shell-Type Ag8@Nb162 Fluorescent Nanocluster.

Atomically precise low-nuclearity (n<10) silver nanoclusters (AgNCs) have garnered significant interest due to their size-dependent optical properties and diverse applications. However, their synthesis has remained challenging, primarily due to their inherent instability. The present study introduces a new feasible approach for clustering silver ions utilizing highly negative and redox-inert polyoxoniobates (PONbs) as all-inorganic ligands. This strategy not only enables the creation of novel Ag-PONb composite nanoclusters but also facilitates the synthesis of stable low-nuclearity AgNCs. Using this method, we have successfully synthesized a small octanuclear rhombic [Ag8]6+ AgNC stabilized by six highly negative [LiNb27O75]14- polyoxoanions. This marks the first PONb-protected superatomic AgNC, designated as {Ag8@(LiNb27O75)6} (Ag8@Nb162), with an aesthetically spherical core-shell structure. The crystalline Ag8@Nb162 is stable under ambient conditions, What's more, it is water-soluble and able to maintain its molecular cluster structure intact in water. Further, the stable small [Ag8]6+ AgNC has interesting temperature- and pH-dependent reversible fluorescence response, based on which a multiple optical encryption mode for anti-counterfeit technology was demonstrated. This work offers a promising avenue for the synthesis of fascinating and stable PONb-protected AgNCs and sheds light on the development of new-type optical functional materials.

Analysis of structural, electronic and optical properties of Er-doped rock salt AlN using ab-initio calculations.

This investigation includes the structural and optoelectronic characteristics of both pure and Er-doped rock salt aluminium nitride (AlN). Upon introducing Er doping into the AlN host, the calculations reveal a rise in the atomic parameter. Incorporating Er into the system leads to enhancements in the static dielectric coefficient ɛ1(0), static reflectivity R(0), as well as static refractive index n(0), at zero frequency. After doping, the peaks of imaginary dielectric tensor, extinction coefficient and absorption coefficient shift towards lower energy levels. Various exchange correlation potentials are incorporated to compare the results of electronic and optical characteristics. We employed the full potential linearized augmented plane wave (FP-LAPW) approach with WIEN2k code in conjunction with the density functional theory (DFT). To explore the optoelectronic characteristics of both pure as well as doped systems, three distinct exchange correlation potentials are utilized: the Perdew-Burke-Ernzerhof Generalized Gradient Approximation (PBE-GGA), Modified Becke Johnson Generalized Gradient Approximations (mBJ + GGA) and Hubbard potential (GGA + U).

Modulation and Enhancement of Red Luminescence in Ca2GdSbO6: Eu3+ Phosphor by Co-Doping with Bi3.

The double perovskite structure of Ca2GdSbO6 as a fluorescent phosphor matrix material possesses a stable structure, making it an excellent candidate for a matrix material. In this study, single-doped Ca2GdSbO6: Eu3+ fluorescent phosphors and Bi3+ sensitized Ca2GdSbO6: Eu3+, Bi3+ fluorescent phosphor materials were synthesized using the high-temperature solid-state method. The luminescence of this phosphor is based on the 5D0→4F2 transition emission of Eu3+ ions, which occurs at 612nm. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) spectra, high-temperature fluorescence spectra, and fluorescence decay lifetimes to study the phase structure, optical properties, crystal structure, and chemical purity of the samples. The performance of the single-doped phosphor was significantly improved by the addition of Bi3+ sensitizer. The luminescence intensity increased by nearly 100% compared to Ca2GdSbO6: Eu3+ phosphor, with a quantum efficiency increase of 124%. The thermal quenching activation energy was found to be 0.299eV, and the luminescence intensity remained at 70.3% of room temperature at 453K. These results indicate that the co-doping of Bi3+ has a modulation and enhancement effect on the luminescence of Ca2GdSbO6: Eu3+ red phosphor, showing great potential for application in near-ultraviolet-excited white LED devices.

Angle-Resolved Polarimetry with Quasi-Bound States in the Continuum Plasmonic Metamaterials via 3D Aerosol Nanoprinting.

Three-dimensional (3D) plasmonic metamaterials, featuring well-arranged subwavelength nanostructures, facilitate effective coupling between electrical dipoles and incident electromagnetic waves. This coupling allows for unique optical responses including localized surface plasmon resonance (LSPR) and quasi-bound states in the continuum (q-BIC). While 3D plasmonic metamaterials with LSPR and q-BIC have been independently explored for sensors, achieving simultaneous optical responses in the near-infrared region remains challenging. Here, we present 3D plasmonic metamaterials that integrate LSPR and q-BIC within a single π-shaped plasmonic structure, fabricated using a 3D aerosol nanoprinting technique. This printing technique controls the local electrostatic field to precisely position charged metallic nanoaerosols, enabling parallel printing of π-shaped plasmonic structures under ambient conditions. The printed π-shaped plasmonic structures exhibit two distinct optical modes: x-polarization-sensitive LSPR and transverse magnetic mode-sensitive q-BIC within the near-infrared region. Exploiting these dual optical responses, we demonstrate simultaneous polarization detection and incident angle analysis by integrating the π-shaped plasmonic structures into commercial Fourier-transform infrared spectroscopy, termed "numerical aperture-detective polarimetry". This approach holds promise for evaluating alignment in optical and imaging systems with light distribution analysis. Furthermore, the 3D aerosol nanoprinting technique provides an avenue for fabricating 3D plasmonic metamaterials with intricate geometries and optical properties, expanding their potential applications in nano-optics.

Effects of phantom microstructure on their optical properties

Effects of phantom microstructure on their optical properties

Liquid-Metal-Based Spin-Coating Exfoliation for Atomically Thin Metal Oxide Synthesis.

Two-dimensional (2D) semiconductors possess exceptional electronic, optical, and magnetic properties, making them highly desirable for widespread applications. However, conventional mechanical exfoliation and epitaxial growth methods are insufficient in meeting the demand for atomically thin films covering large areas while maintaining high quality. Herein, leveraging liquid metal oxidation reaction, we propose a motorized spin-coating exfoliation strategy to efficiently produce large-area 2D metal oxide (2DMO) semiconductors with high crystallinity, atomically thin thickness, and flat surfaces on diverse substrates. Moreover, we realized a 2D gallium oxide-based deep ultraviolet solar-blind photodetector featuring a metal-semiconductor-metal structure, showcasing high responsivity (8.24 A W-1) at 254 nm and excellent sensitivity (4.3 × 1012 cm Hz1/2 W-1). This novel liquid-metal-based spin-coating exfoliation strategy offers great potential for synthesizing atomically thin 2D semiconductors, opening new avenues for future functional electronic and optical applications.

Tetrazole-functionalized Organoboranes Exhibiting Dynamic Intramolecular N→B-Coordination and Cyanide-selective Anion Binding.

Starting from two different cyano-functionalized organoboranes, we demonstrate that 1,3-dipolar [3+2] azide-nitrile cycloaddition can serve to generate libraries of alkyl-tetrazole-functionalized compounds capable of intramolecular NàB-Lewis adduct formation. Due to the relatively low basicity of tetrazoles, structures can be generated that exhibit weak and labile NàB-coordination. The reaction furnishes 1- and 2-alkylated regio-isomers that exhibit different effective Lewis-acidities at the boron centers, and vary in their optical absorption and fluorescence properties. Indeed, we identified derivatives capable of selectively binding cyanide over fluoride, as confirmed by 11B NMR. This finding demonstrates the potentialities of this synthetic strategy to systematically fine-tune the properties of lead structures that are of interest as chemical sensors.

Photocatalytic degradation of antibiotics and antimicrobial and anticancer activities of two-dimensional ZnO nanosheets

Active pharmaceutical ingredients have emerged as an environmentally undesirable element because of their widespread exploitation and consequent pollution, which has deleterious effects on living things. In the pursuit of sustainable environmental remediation, biomedical applications, and energy production, there has been a significant focus on two-dimensional materials (2D materials) owing to their unique electrical, optical, and structural properties. Herein, we have synthesized 2D zinc oxide nanosheets (ZnO NSs) using a facile and practicable hydrothermal method and characterized them thoroughly using spectroscopic and microscopic techniques. The 2D nanosheets are used as an efficient photocatalyst for antibiotic (herein, end-user ciprofloxacin (CIP) was used as a model antibiotic) degradation under sunlight. It is observed that ZnO NSs photodegrade ~ 90% of CIP within two hours of sunlight illumination. The molecular mechanism of CIP degradation is proposed based on ex-situ IR analysis. Moreover, the 2D ZNO NSs are used as an antimicrobial agent and exhibit antibacterial qualities against a range of bacterial species, including Escherichia coli, Staphylococcus aureus, and MIC of the bacteria are found to be 5 μg/l and 10 μg/l, respectively. Despite having the biocompatible nature of ZnO, as-synthesized nanosheets have also shown cytotoxicity against two types of cancer cells, i.e. A549 and A375. Thus, ZnO nanosheets showed a nontoxic nature, which can be exploited as promising alternatives in different biomedical applications.

Experimental and Theoretical Insights on the Structural, Electronic, and Magnetic Properties of the Quaternary Selenides EuPrCuSe3 and EuNdCuSe3.

Magnetic semiconductors EuPrCuSe3 and EuNdCuSe3 were obtained by using the halide flux method. Their crystal structures and magnetic properties were studied and discussed. Optical properties of the obtained selenides were studied by the means of diffuse reflectance spectroscopy, which revealed the values of 1.92/1.97 and 0.90/0.94 eV for the direct and indirect band gaps of Ln = Nd/Pr, respectively. The structural, electronic, and magnetic properties of the obtained compounds were additionally studied with spin-polarized density functional theory calculations, wherein both systems were found to be two new examples of semiconducting quaternary selenides with disperse conduction bands of Nd/Pr 5d character. The modeling showed that various magnetic orderings in the systems have subtle influences on the alignments/overlaps between the Se/Cu, Eu, and Pr/Nd bands, and that the spin-state energetics are very dependent upon the treatment of electron correlation, but a distinguishing feature in the case of ferromagnetic coupling is that the spin density on the Se atoms is maximized. Overall, the calculations are in good agreement with the experimental characterization of ferromagnetism in the bulk crystals, wherein the ferromagnetic transition occurs at temperatures of about 2.5 K for EuPrCuSe3 and about 3 K for EuNdCuSe3.

User-Friendly Multifunctional Red-Emissive Carbon Dots for Rapid Cell Nucleus Staining via Targeting Nuclear Proteins.

Cytoarchitectural staining is of great importance in disease diagnosis and cell biology research. This study developed user-friendly multifunctional red-emissive carbon dots (R-CDs) for rapid cell nucleus staining via targeting nuclear proteins. R-CDs, simply prepared by electrochemical treatment of 1,2,4-benzenetriamine, exhibit strong emission at 635 nm when excited at 507 nm. The R-CDs can rapidly stain the nucleus of human SH-SY5Y, HepG2, and HUH-7 cells with a high signal-to-noise ratio owing to fluorescence enhancement after entering the nucleus. Compared to conventional cytosolic dyes such as Hoechst and DAPI, R-CDs are cheaper, more highly dispersed in water, and more stable (requiring no stringent storage conditions). The R-CDs show stable optical properties with insignificant photobleaching over 7 days and salt resistance up to 2 M of NaCl. More importantly, R-CDs, possessing a positive charge, allow rapid staining of live cells (3 min) and dead cells (10 s) in saline. According to kinetic variation, R-CDs can distinguish live cells from dead cells. Staining exhibits high efficiency in onion epidermal cells, Aspergillus niger, Caenorhabditis elegans, and human spermatozoa. The mechanism for efficient staining is based on their fast accumulation in the nucleus due to their small size and positive charge and strong interaction with nuclear proteins at amino acid residues of histidine and arginine, resulting in fluorescence enhancement by dozens of times. The developed R-CDs do not bind to DNA and would not cause genetic damage and will find various safe applications in biological and medical fields.

Effect of Eu Concentration on the Optical Properties of BaMgSiO4 Long Persisting Phosphorous Material

Effect of Eu Concentration on the Optical Properties of BaMgSiO4 Long Persisting Phosphorous Material

Quantum Dot‐Doped Optical Fibers

AbstractGain medium‐doped active optical fibers for optical amplification and long‐range transmission have triggered a lot of researches. Traditional rare‐earth ion‐doped active fibers have non‐adjustable emissions, narrow band luminescence, limited gain enhancement, and other challenges. The unique optical properties of quantum dots (QDs) can further improve the doped optical fibers in the light amplification capacity, temperature sensitivity and to gain a broad‐spectrum coverage and lower laser threshold and other superiorities. However, there are few systematic discussions on the development of the technologies and applications of those QD‐doped optical fibers. In this review, the optical properties, temperature characteristics and optical amplification mechanisms of QD‐doped optical fibers are outlined. Then, the preparation technologies and the applications of QD‐doped optical fibers are highlighted. Additionally, the existing challenges and future development prospects of QD‐doped optical fibers are discussed.

The effect of seed layer cycles on the structural, optical, and morphological properties of ZnO nanorods.

In this study, ZnO seed layers with different cycles were formed on glass substrates by the sol-gel technique, and ZnO nanorods were grown on them by the hydrothermal method. Morphology and the structural characterization of the seed films and the ZnO nanorods are carried out by field emission scanning electron microscopy (FE-SEM) and x-ray diffraction techniques. In addition, to investigate the effect of seed layer deposition cycles on the optical properties of the ZnO nanorod arrays, UV/visible spectrophotometer and photoluminescence (PL) measurements were performed. The changes in structural and optical parameters such as dislocation density, strain, crystallite size, and optical band gap values on each seed layer deposition cycle were examined. The highest optical band gap and crystallite size were obtained for ZnO nanorods with 4 cycles seed layer as 3.22 eV and 63.6 nm, respectively. Also, in the PL spectrum, the largest ratio of UV-emission region to weak-visible emission region was obtained in ZnO nanorods having 4 cycles. In addition, the glucose detection properties of ZnO nanorods having 4 cycles were investigated using the PL measurements and it was found that UV-emission peak intensity of ZnO nanorods decreased as the glucose concentration increased from 8 to 40 mM. The results show that the number of deposition cycles of the seed layer has a strong influence on the orientation, crystal quality, and optical band gap of the growing ZnO nanorods, as well as significantly affecting their morphological properties. RESEARCH HIGHLIGHTS: High quality ZnO nanorods were grown on glass substrates by hydrothermal method. The effect of ZnO seed layer cycles on the structural, optical, and morphological characteristics of ZnO nanorods grown on were examined. It was found that the number of cycles of the seed layer is a critical parameter for growing quality and well-aligned ZnO nanorods.

Exploring the Influence of Cation and Halide Substitution in the Structure and Optical Properties of CH3NH3NiCl3 Perovskite

Exploring the Influence of Cation and Halide Substitution in the Structure and Optical Properties of CH3NH3NiCl3 Perovskite

Controlling the broadband enhanced light chirality with L-shaped dielectric metamaterials

The inherently weak chiroptical responses of natural materials limit their usage for controlling and enhancing chiral light-matter interactions. Recently, several nanostructures with subwavelength scale dimensions were demonstrated, mainly due to the advent of nanofabrication technologies, as a potential alternative to efficiently enhance chirality. However, the intrinsic lossy nature of metals and the inherent narrowband response of dielectric planar thin films or metasurface structures pose severe limitations toward the practical realization of broadband and tailorable chiral systems. Here, we tackle these problems by designing all-dielectric silicon-based L-shaped optical metamaterials based on tilted nanopillars that exhibit broadband and enhanced chiroptical response in transmission operation. We use an emerging bottom-up fabrication approach, named glancing angle deposition, to assemble these dielectric metamaterials on a wafer scale. The reported strong chirality and optical anisotropic properties are controllable in terms of both amplitude and operating frequency by simply varying the shape and dimensions of the nanopillars. The presented nanostructures can be used in a plethora of emerging nanophotonic applications, such as chiral sensors, polarization filters, and spin-locked nanowaveguides.

The Chemical and Optical Stability Evaluation of Injectable Restorative Materials Under Wet Challenge.

To investigate and compare the chemical and optical stability of four restorative composite materials: two injectable resins, one flowable resin and one compomer. Two injectable nano-filled composite resins: G-aeniel Universal (GU) and Beautifil Injectable XSL (BI), a flowable composite resin: Filtek Supreme Flowable (FS) and a compomer: Dyract Flow (DF), in A2 shade were tested and compared. Water sorption and solubility were conducted according to ISO4049: 2019 standard; ICP-OES and F-ion selective electrode were used to test the elemental release; Degree of conversion (DC) was obtained by using FTIR; water contact angle was obtained by static sessile drop method, and spectrophotometer was used for optical properties (ΔE*, ΔL* and TP). SPSS 28.0 was used for statistical analysis and the significant level was pre-set as α=0.05. GU performed the best in water sorption and solubility, FS had the lowest elemental release, the best colour stability, and the highest DCIM and DC24-h. DF, the compomer had the lowest, and GU and BI, the injectable composites had the largest water contact angle, respectively. Correlations were found between water sorption and water solubility. The four composite restorative materials showed different chemical and optical behaviours. Overall, composite resins performed better than compomer, while additional laboratory and in vivo tests are necessary to obtain a more comprehensive comparison between injectable and flowable composite resins. Wsp and Wsl are influenced by many common factors, and the values are highly positively related. A comprehensive understanding of materials is crucial before selecting materials for clinical practice. Composite resins rather than compomers are recommended because of their exceptional properties, which make them eligible for a wide range of clinical applications and an elongated lifespan.